Assembling an Ergotron Monitor Arm [Installation and Mounting Instructions]

Working from home has become a habit these days, and out of all the desk accessories I've tried, this is the one I think is the best purchase!
"Ergotron Monitor Arm: LX Desk Mount".

It's the kind of thing you see on monitors used by doctors in hospital examination rooms.
I also see it often in dental examination rooms.
This is useful in places where you need to move the monitor around a lot.

This time, we will tell you how to install this monitor arm and the benefits of installing a monitor arm!
[amazonjs asin="B00358RIRC" locale="JP" title="Ergotron LX Desk Mount Monitor Arm Aluminum 45-241-026"]

What is an Ergotron monitor arm?

Ergotron monitor arms are so reliable that they are used in hospital examination rooms and other places.
The prices of monitor arms vary widely, with most products costing around 5 to 6000 yen on average, but Ergotron's monitor arms are quite expensive, costing over 10000 yen.
However, it is well worth the price, and boasts performance and durability that exceeds the price.Cospa is good" product.

There are several types of monitor arms, ranging from non-swivel pole types, multi-monitor types that can mount multiple monitors, and simple wall-mounted types.

This time we have prepared the most orthodox and best-selling product.
This is a swivel arm for a single monitor.

Ergotron monitor arm unboxing

So let's start by unpacking it!
The Ergotron monitor arm arrives disassembled.
It is quite heavy, so it may be best to have two people install it.

When you open the box, a mysterious man appears in a gaming pose.
An installation manual is also included.

The arm itself is divided into several parts, which are assembled together to be installed.
The base is compatible with clamp and grommet types, and all parts are included.

So, what are clamp-type and grommet-type? You may be wondering, so let me give you a quick explanation...
・Clamp type
"ClampThis method involves clamping the device to the desk using a vise-like screw-type device called a ``.''
The arm can be attached to the desk without any special processing, and is a common mounting method used for monitor arms.
Grommet type
This method requires drilling holes in the desk.
The advantage of the grommet type is that you can install the arm anywhere on the desk, but the disadvantage is that you have to drill holes.

Ergotron Monitor Arm Assembly and Installation

From here, we will explain how to assemble and install the Ergotron monitor arm.
Here it is as it looks when taken out of the box.
Even though it's disassembled, the parts are still quite heavy.

You can set up the base or prepare the monitor first, but I chose to start with setting up the base.
"here!Once you have decided on the location, secure it to the desk with a clamp.
Considering the possibility of moving the installation location, tighten the clamps only temporarily and do not tighten them too tightly.

Next, prepare the monitor.
Only monitors that comply with the VESA standard can be attached.
The screw holes on the back of the monitor
"75mm × 75mm"or"100mm x 100mmIt cannot be installed on monitors other than this one.
Most products currently on the market are compatible with the VESA standard, so unless you choose a particularly special product, you should be able to install it.

Screw the monitor arm mounting plate onto the back of the monitor.

After that, you attach it to the base, but there is one thing to note here.
If you attach the arm like this, the monitor will remain facing the ceiling.
And I can't lower my head...
Furthermore, once the monitor is placed on the monitor arm, it becomes almost impossible to adjust it, so we first adjust it so that the monitor can be moved up and down.

All you need to prepare is this hexagon that came with the arm.

Use this hexagon to loosen the screw.
This is where you can loosen up!

Make sure to loosen it before attaching it to the arm!

Once you're ready, install it.
The installation itself is not particularly difficult; all you have to do is insert the arm into the pole.

If you tighten the hexagonal joint, you can tighten the left and right swing, so if you don't plan on moving it much while it's inserted, make sure to tighten it firmly!
*If you tighten the part framed in red, the arm will no longer rotate left or right.

Install a monitor arm to improve your work efficiency

First, here's a look at the desk environment after installation.

The main monitor on the right uses a base without an arm.
The Hatsune Miku monitor that I had been using as my main monitor has been placed on the left side as a sub-monitor.
Monitor arms are strange things; once you use one, you can't imagine working without one because they're so convenient.
What's more, it is a very difficult peripheral device to describe in words just how convenient it is.
Although each person may feel differently, the following two points are benefits that everyone can gain.

・Less desk space
Since there is no monitor stand, you can have more workspace on your desk.
There is also space for storage cases, etc., making your desk even more tidy.
Having a workspace has helped reduce stress much more than I expected.
If you have a lot of stuff on your desk, we recommend installing a monitor arm.

- Easier to adjust the monitor position
Even small adjustments can be easily made with a monitor arm.
The position and angle can be adjusted to suit your eye level, reducing strain on your body.

The Ergotron LX monitor arm I purchased this time was on sale for about 12,000 yen, but it is a product that I would want to buy again even if the price had risen to 20,000 yen if the arm I am currently using broke down.