Review of the SANODESK EC5 electric height-adjustable desk recommended for teleworking

Manufacturers of desks and exercise bikes,FLEXISPOT(https://flexispot.jp/) brandSANODESKElectric height adjustable desk released bySANODESK EC5" has dramatically improved my desk environment, so I would like to review this product.

SANODESK EC5 review

Unboxing the SANODESK EC5

First, let me introduce the packaging.

Top plate.
It's huge! No explanation needed!!

This is the desk itself.
As you can see from the soft vinyl figure placed there for comparison, it is more compact than I expected.
However, it is heavy, so be careful when receiving the delivery.

When you open it, it's packed with parts like this.
The gaps are tightly packed with packing material, showing that care has been taken to prevent damage during transport.

The cables and screws are stored in the inner box.
Make sure you have all the parts before assembling.

Incidentally,Desk and tabletop sold separatelyPlease be careful as it is stated as follows.

Assemble the SANODESK EC5!

Since it's an electric height adjustable desk, you might imagine it would be a complicated process, but according to the instructions:Assembly isJust 6 stepsIt is completed in 10 seconds, which is far less than the transformation steps of a Scout-class Transformer!
The breakdown is as follows:

There shouldn't be any problems if you assemble it according to the instructions, but if I had to say something, it would be that assembling the beam is a little complicated.

As a point,The beam parts areThe left and right sides have different shapesSo, please check the instructions and parts carefully, and if you feel any snag when connecting the connecting rod,〇 DepartmentLoosening the metal fittings a little will make it smoother.
Once you have successfully connected, tighten it again.

As for tools, most of the assembly can be done using the included hexagonal screwdriver, but a Phillips screwdriver is only required when attaching the top plate.
It's a good idea to have an impact driver on hand, as it will make things easier.

The desk will be quite heavy once assembled, so we strongly recommend two-player co-op when flipping it over.

soComplete!!
The author isd anime storeWhile pouring outApproximately 1 hour and 30 minutesI was able to assemble it.
It's much easier than Gunpla, so even those who are hesitant about the assembly requirement can purchase it with confidence.

SANODESK EC5 electric lift function

The highlight of this "SANODESK EC5" is thisElectric lift function.

The height can be adjusted using the up and down buttons on the controller attached to the bottom of the tabletop.
In addition, Memory functionIt is attached,Stores up to four favorite heightsIt is possible to leave it as it is.
Easy to use and can be adjusted to your preferred height"M"After pressing the button,"Standing" "Sitting" "3" "4"Just press the button you want to assign.
From then on, pressing that button will automatically raise or lower the device to the height you have memorized.
You can also reset it in the same way.

There is one USB port for power supply at the bottom of the controller.

The lowest positionHere it is.
The controller has64.5It is displayed as follows.
For electric liftObstacle detection functionIt is equipped with a function that stops the robot when it encounters an obstacle while descending and then rises slightly.
I also accidentally pressed the down button when the armrest of my chair had slipped under the desk, but the obstacle detection function kicked in and I was saved.
This feature also allows you to adjust the sensitivity.

vice versaMaximum heightened state.
The controller has130and displayed.
As for setting it up, it does tend to shake if you set it as high as possible, but there were no problems at all at the practical height used for work.
According to the instructions, the continuous use time is 2 minutes, with an 18-minute interval between uses.
It is unlikely that you would need to keep it running for two minutes during normal use, but you should be careful if you have small children around.

Completely transform your desk environment! Work from home more efficiently?

First, let me show you my current desk setup.

Is this for real?
The desk is way too flimsy compared to the chair...

Just placing my laptop on it took up 80% of the space, and the keyboard vibrated violently when I typed on it, so I wasn't sure if it could really be called a "desk" (it was missing one fixing screw).

But now...

It's so spacious!!

Not only can it be used for telework and everyday work,

The environment for playing PCDJ has also improved dramatically.
Until now, I had to play in a cramped position while sitting, but now it's spacious and

While standing,

While standing,

""Standing""

Being able to play is truly

I'm so happy!!!

Recently, there has been an increase in the number of electric height-adjustable desks being sold specifically for gaming purposes, and I felt that they were certainly suitable in that they could be easily adapted to various gaming positions.
So, if you've been spending more time working from home during the coronavirus pandemic, why not consider purchasing an electric height-adjustable desk?

The sales site is here ↓
https://item.rakuten.co.jp/loctek/e3b/

[amazonjs asin=”B08F7MQL3S” locale=”JP” title=”FLEXISPOT Standing Desk, Electric Height Adjustable Desk, Ergonomic Computer Desk, Black, Gaming Desk E7B”]