[Victrix Pro FS (V2)] Review of the strongest arcade stick

Finally, I was finally able to get it.
The ultimate arcade controller, made from machined aluminum and packed with a variety of features, has arrived in Japan.
Pre-released at EVO JapanVictrix Pro FS(V2)I was able to get my hands on this, so I would like to review it this time.

Furthermore, the review content in the article is based on personal subjective opinion.Quite" is included, so if you are considering purchasing it, please keep that in mind!!

https://akihabara-bc.jp/evoj2020/
[amazonjs asin="B07PB6GMLK" locale="JP" title="Victrix Pro FS Arcade Fight Stick with Touchpad for PS4 (051-083-JP)"]

What is Victrix Pro FS (V2)?

The Victrix Pro FS (V2) features a machined aluminum body, a detachable lever, and a bottom opening/closing mechanism that is easy to maintain.
This is an arcade stick that can be recommended for all purposes, from everyday use to players who travel to other locations.
At 40,000 yen, it's not exactly cheap, but it's a great product that's packed with features that many arcade stick players have been wanting and also looks cool.
If you've read this article to the end, you'll definitely want the Victrix Pro FS (V2)...

Victrix Pro FS(V2) [Unboxing]

Lot number 52/500.
Only about 50 Victrix Pro FS (V2) units were released in advance, so if I had been even a little bit later I probably wouldn't have been able to buy one.

When I opened the carefully packed cardboard box,Introducing a super luxurious cosmetic box.


It's quite difficult to convey this to many people, butiPhone boxIt's easier to understand if you imagine this.
When you open the packaging, you'll find a pamphlet in purple, Victrix's image color.

The pamphlet is also well made, and feels more like an art book containing concept art than a pamphlet.


The contents are as follows.
・Arcade controller (with cloth bag)
- Replacement lever (one included in addition to the detachable one)
・USB cable (Type-C) for Victrix Pro FS (V2)
・パンフレット
It has become.

Victrix Pro FS(V2) [Details: Top plate surface]

Let's start by looking at the top plate.
The layout of the levers and buttons is similar to that of a Viewlix.
ViewrixWindThere is a reason why we wrote it as "."

The button placement is similar to that of a Viewlix, but the distance between the lever and the button is about as far as that of a Noir.
There is a reason why I use the Noir configuration of the fighting edge blade.The short distance between the lever and the button is stressful'That's because...'
I like the button layout of the Viewlix, but I want the feel of the lever and buttons to be as good as the Noir...
I think there are many people who think the same as me, but the Victrix Pro FS (V2) has a lever and button layout that will instantly eliminate any such worries.神.

The levers and buttons are made by Sanwa, and the removable lever that comes pre-installed is a special product exclusive to the Victrix Pro FS (V2).
The lever can be removed by pulling the shaft, eliminating the protruding part on the lever that gets in the way when carrying the device.

*Can be easily removed and installed by simply pulling the outer shaft.

*The lever ball is specially made with a recess. Regular Sanwa parts can also be attached, but they will look awkward.

Victrix Pro FS(V2) [Details: Bottom]

Next, let's look at the bottom.
You can easily access the inside by pulling the lever on the bottom.

InsideDetachable lever, rubber cap, hex wrenchThere is a storage space.

Can you see that the part that comes into contact with the lever guide is gouged out?
This recess makes it possible to install Golden Lever and Hayabusa Lever, which could not be installed on older models.
*I'll try replacing the lever at a later date. If it's possible to do so神of神It becomes an arcade controller.

The wiring is pretty tightly packed.
It uses a braided cable so it won't break easily.
However, since it is quite sturdy, even though it is easy to access the inside, replacing the buttons and levers may be a bit of a hassle.
In particular, the wiring on the lever side is quite short in length, so depending on the item, it may not be possible to replace it.
This is something that needs to be verified.

Victrix Pro FS (V2) [Details: Other]

The Victrix Pro FS (V2) cable isUSB Type-CAdopted.
You can connect it without worrying about the front or back.


The cable can also be wrapped around the shoulder strap attachment point.

Some may point out that "Isn't that the wrong way to use it?", but looking at the position of the clip at the end of the cable, I believe this is the correct way to use it.

The shoulder strap attachment hardware can be removed, so if you don't need it, just remove it.
Use the included hexagonal bolt to install and remove.

There is a headphone jack at the bottom of the Victrix Pro FS (V2).
Compatible with 4-pin headsetsIt has become.

Victrix Pro FS(V2) [Details: Power supply]

Simply connect the cable to your PS4 or PC and turn it on to start using it right away.
The default lighting is purple.

You can change the lighting and color by pressing the lighting switch on the top surface, so enjoy the lighting you like!
Personally, I think the default purple is the best.

Also, with the addition of the touchpad, the number of buttons on the top has been reduced compared to the previous model, so if you want to use the R3 button etc.Remapping functionMust be set using
For more details, please see the official Victrix Tweet!

Thank you for choosing a Victrix product. We apologize for any inconvenience caused by the "R3" button. The "PRO" button is set to "L3" by default, but it can be remapped to "R3." Please see the image for detailed setup instructions. Thank you for your understanding. pic.twitter.com/VQSrXiR3Rb

— Victrix Pro (@VictrixPro) August 9, 2019

Victrix Pro FS (V2) [Details: Laser Engraved]

The Victrix Pro FS (V2) can be laser engraved.
Anyone with a Victrix arcade stick can participate for free.
However, Victrix must bring a laser engraving machine to the event.
↓The laser engraving looks like this.

#Victrix It's laser engraved!
I was pretty excited to carve it into the 4 yen box. pic.twitter.com/8X1JB8B5Sz

— Akihabara Base Camp (@akihabara_bc) January 26, 2020

Basically, any illustration or logo can be engraved, but it does not support subtle color changes such as gradients.
The illustration is expressed using black and white, carved and uncarved areas.
They will convert color illustrations to black and white on the spot and adjust the look to suit your taste, so just leave it to them and let them carve it for you!
*The author carved the ABC logo and the logo of one of the participating teams.

The Victrix Pro FS (V2) is one of the most powerful arcade controllers available today.

Finally, let's take a look back at the main specifications of the Victrix Pro FS (V2).
- Machined aluminum body (aircraft grade)
- Detachable lever (can be replaced with a regular lever)
・USB Type-C cable (detachable)
・Shoulder strap available
・One-touch internal access
- Equipped with a touchpad
- Equipped with a headphone jack
・Wide spacing between levers and buttons
・Cool lighting
- Uniqueness due to laser engraving
If we were to list all the details, there would be quite a few, but these are the things you will probably be most concerned about when purchasing an arcade controller.
There is little input delay, and in a certain test5ms (5/1000 seconds)Research has also shown that...
You might be a little hesitant about the 40,000 yen price tag, but all of the above specifications can be considered advantages.
I think 40,000 yen is a pretty good price for this benefit.
There are many arcade sticks that are cheaper than the Victrix Pro FS (V2), but there are also many arcade stick players who say, "If only there was this, if only there was that..."WantEven if you search the world, the only arcade stick that has this feature is the Victrix Pro FS (V2).

It will also be available on Amazon Japan from March 31st, so if you're interested, be sure to check it out!
[amazonjs asin="B07PB6GMLK" locale="JP" title="Victrix Pro FS Arcade Fight Stick with Touchpad for PS4 (051-083-JP)"]

↓Customize your arcade controller to your liking!

https://akihabara-bc.jp/akekon-parts/

https://akihabara-bc.jp/akekon-kaizou/

↓ Recommended arcade controller buttons are here

https://akihabara-bc.jp/akekon-kaizou03/